[Feature]: scan openipc device NOT all the IP devices

[lida2003]

Requirements

• I have updated Configurator to the latest available version
• I did a search to see if there is a similar issue or if a pull request is open.

Is your feature request related to a problem?

Not quite sure if it's a problem, but it indeed causes inconvenience.

Describe the solution you'd like

scan openipc device NOT all the IP devices

1. scan local network
2. check if it's an openipc device (there are quite a lot of ways to do it)
   • if there is any discovery protocol supported, such as Simple Service Discovery Protocol (SSDP)
   • try to login via ssh to verify valid device or NOT
   • try to use majestic management/wfb-ng port to check
   • ONVIF Auto Discovery
   • etc. which protocols or methods didn’t come to mind immediately?
3. list openipc device in the result box

Describe alternatives you've considered

No response

Additional context

As you can see, there is only one openipc device(192.168.1.13), but.... quite a lot of IPs.