New quirks for "X68000"

[aotta]

I added a new quirks "X68000" to handle some errors on non-standard "00" commands.
It solved loading errors in several games / program that loaded fine with older ArdSCSIno firmware

[erichelgeson]

Thank you for digging into this and providing a patch!

Could you add it to this method too? https://github.com/BlueSCSI/BlueSCSI-v2/blob/main/src/BlueSCSI.cpp#L201

Notes from Discord:
This is an observed behavior - since the SASI docs are difficult to find/read (in JP mainly) - if we could find a spec that verifies this behavior it would be best.
Looking at PiSCSI they seem to not check the control bit so thats why theirs works with SASI/X68K machines.

[aotta]

Could you add it to this method too? https://github.com/BlueSCSI/BlueSCSI-v2/blob/main/src/BlueSCSI.cpp#L201

i already added the update for BlueSCSI.cpp in pull, i missed something?

Notes from Discord: This is an observed behavior - since the SASI docs are difficult to find/read (in JP mainly) - if we could find a spec that verifies this behavior it would be best. Looking at PiSCSI they seem to not check the control bit so thats why theirs works with SASI/X68K machines.

Well, i didn't find any docs about the two non standard call, but for sure it's not enough in V2 to simply pass status "good" for both calls, since i had errors it that ways (even if it's strange since ArcSCSIno - that works fine with SASI - seems to handle all 0x00 commands with "no sense" and "good").
The patch i propose it's in fact a bit "empiric" but it works fine so far.

[erichelgeson]

I squashed and cleaned up some white space and cherry picked it in via aa77d67 - thanks again!